Balancing Machines Vibration Analyzer Calibration and Service Balancing Services Tips & Tricks Links Contact

2000 lbs capacity

Product Description

Rotor Dimensions 
  
Maximum part diameter over drive
50 inches (1270 mm)
Maximum part diameter over bed
63 inches (1600 mm)
Maximum part distance between
support bearing centerlines
31 inches (787 mm) using one bed
Minimum part distance between
support bearings centerlines

Outboard:  4 inches (102 mm)
Inboard:  9 inches (229 mm)
1 inch (25.4 mm) with optional fixture

Journal diameters on standard
bearing set
1/8 to 15 inches (3.2 to 381 mm)
  
Machine Base
 
  
Machine Base Length
72 inches (1829 mm)
Machine Base Width
32 inches (813 mm)
Machine Width (including drive)
50 inches (1270 mm)
  
Rotor Mass and Unbalanced Limitation
 
  
Maximum Weight2,000 lbs. (908 Kg)
Minimum Weight
1 lb. (454 g)
Maximum Weight per Support
1,400 lbs. (636 Kg)
Maximum Overload per Support
1,500 lbs. (681 Kg)
Maximum indicated sensitive per plane
(instrument readout capability)
.0001 ounce-inch
.03 gram-inch
Maximum Achievable
.0084 ounce-inch total
Residual Unbalance
.0042 ounce-inch/plane
under ideal rotor conditions but not to exceed
.000005 inches mass center displacement
Maximum Unbalance reduction per run
95%
Shipping Weight
1200 lbs. (544 Kg) (pallet)
 1550 lbs. (703 Kg) (crate)
Motor & Control
 
Variable Frequency AC Drive with programable acceleration/deceleration patterns
 
DC injection breaking0.1 to 240 Hz Output
Rated Horsepower2 hp at 1800 RPM (1.5 Kw)
Speed Range
10 to 4000 RPM
Power Required
200 to 230 Volt, 3 phase 60 Hz or
380 to 460 Volt, 3 phase 50/60 Hz optional
Recommended Balancing Speed
150 to 4000 RPM

 

Specifications with Drawing 

Contact Our Team