5000 lbs economy
Product Description
| Rotor Dimentions | |
| Maximum part diameter over drive | 63 inches (1600 mm) |
| Maximum part diameter over bed | 63 inches (1600 mm) |
| Maximum part distance between support bearings centerlines | 68 inches (1727 mm) using one bed unlimited splitting beds |
| Minimum distance between support bearings centerlines | Outboard: 4 inches (102 mm) Inboard: 9 inches (229 mm) 1” (25.4 mm) with optional fixture |
| Journal diameters on standard bearing set | 1/8 to 17 in. (3.2 to 431 mm) |
| Machine Base | |
| Machine Base length | 2-48 inch beds (1219 mm) |
| Machine Base Width | 32 inches (813 mm) |
| Machine Width (Including drive) | 50 inches (1270 mm) |
| Rotor Mass and Unbalance Limitation | |
| Maximum Weight | 5,000 lbs. (2268 Kg) |
| Minimum Weight | 1 lb. (.454 g) |
| Maximum Weight per Support | 3,500 lbs. (1589 Kg) |
| Maximum Overload per Support | 3,750 lbs. (1702 Kg) |
| Maximum indicated sensitivity per Plane (instrument readout capability) | .0001 ounce-inch .03 gram-inch |
| Maximum Achievable | .004 ounce-inch total |
Residual Unbalance | .002 ounce-inch/plane under ideal rotor conditions but not to exceed .000005 inches mass center displacement |
| Maximum Unbalance reduction per Run | 95% |
| Shipping Weight | 1,700 lbs. (773 Kg) (pallet) 2,100 lbs. (995 Kg) (crate) |
| Motor & Control | |
| Variable Frequency AC Drive with programmable acceleration/deceleration patterns | |
| DC Injection breaking | 0.1 to 240 Hz Output |
| Rated horsepower | 5 hp at 1800 RPM (2.2 Kw) |
| Speed Range | 10 to 4000 RPM |
Power Required | 200 to 230 Volt, 3 phase 60 Hz or 380 to 460 Volt, 3 phase 50/60 Hz Optional |
| Recommended Balancing Speed | 150-4000 RPM |
